Pages

February 09, 2018

Chinese Knotting Cord Macrame Bracelets

Today will be a challenge. I have been making macrame bracelets with chinese knotting cord since Thanksgiving, and hoping to write about them, but here I am with an hour to go before I leave on a flight and I'm going to get this done!  Crazy!!

DIY Chinese Knotting Cord Bracelets

This isn't the first time I've made or published macrame bracelets. It's one of my first projects I learned in high school.  But, the new part for me is the Chinese knotting cord. It is, for sure, a game changer!  I also made the pretty heart centerpiece above as part of the heart wire jig tutorial I published last week.


I'll start with the fact that it took me a while to realize how great this cord is. It comes in a gazillion beautiful colors, which silly me only bought gold, silver and black because I couldn't choose colors from so many choices.  It's synthetic and silky, but it also has tooth or grip. Not the waxy kind of grip that wears off, liked waxed linen cord, but a kind that is natural to the weave of the cord.

And if you know how to do it right, those nice little macrame slide knots will actually slide and hold - or at least mine have for the last couple of weeks.

So, I'm going to take a step back and go through how I made the bracelets too. Because in addition to being a post about my love of Chinese knotting cord, this is also about re-discovering tools and giving them a second shot. In this case, I'm talking about the Beadalon Tying Station. When I first tried it, we got off to a rough start and I was disappointed.



It still has quirks that make it difficult to use, but after trying other ways, the tool and I have come to a place of mutual understanding. It is a little to tight of a space for my fingers to knot as quickly as I would like, I wish it had clamps instead of twist nuts, but fundamentally, it does the job, it's very portable and rests easy in my lap. So, I've been using it more and more.

Here's one of the bracelets I made as Christmas presents in progress. The tying station works great for tying the bracelet part. I can measure the length using the ruler on the side (even though it is going the wrong way - hopefully that has been corrected).

DIY Chinese Knotting Cord Bracelets using Beadalon Knotting Station

The tool falls down when I try to make the sliding knot. You can slide the ends together and actually make it work, but there was a lot of stuff going on. Of course, I could make it easier on myself by tying off some of the other cords before I got to this point, but I don't.

DIY Chinese Knotting Cord Bracelets using Beadalon Knotting Station

Speaking of tying off ends - Chinese knotting cord is the best for that!! At first, I was following instructions to sew in the cord ends to make everything neat with no little burnt nub ends.  What a waste of time!! It took forever and wasn't tight enough. (BTW, I love the tutorial at the link, even if I thought the finishing method didn't work for me).

DIY Chinese Knotting Cord Bracelets

So after a few bracelets like that, I finally decided to try burning the ends. I was burning the end and flattening it to get through my needle anyway.

Insert Angels singing here - So easy to do it this way!  You still need to be careful, and I push the ends down with a flat nose plier to try and make it hard for them to come loose but it is so much easier!!  The best part, it isn't really noticeable.

DIY Chinese Knotting Cord Bracelets

About the knot tying, I have found my preference for making it is to use a small embroidery hoop instead of the beadalon tying station. The hardest part is getting the two cords from one side aligned with the two from the other side.  The benefit though is that cords are further away from where I am knotting. (the bracelet is basically around the embroidery hoop).

DIY Chinese Knotting Cord Sliding Knot for Bracelet


Knotting away...

DIY Chinese Knotting Cord Sliding Knot for Bracelet

I make these knots tight!  Yes, it's more difficult to put on at first, but they always loosen a little.

DIY Chinese Knotting Cord Sliding Knot for Bracelet

Here's a few of the bracelets that I made.  Some glitzy ones for holiday gifts for my friends.

DIY Chinese Knotting Cord Macrame Bracelet

I trimmed the post off of some earrings to make a couple of these lotus bracelets.

DIY Chinese Knotting Cord Macrame Bracelet

My daughter and her friends like these.

DIY Chinese Knotting Cord Macrame Bracelet

And this flower charm bracelet, which I was wearing, but left in my locker at the gym this week.  Ugh!  I hate it when that happens!  At least I have another charm and can make myself a new one.  Until then, I am wearing the one with copper hearts.

DIY Chinese Knotting Cord Macrame Bracelet

The moral of today's story.  With Chinese knotting cord, you can make a macrame bracelet and finish it in less than an hour, and you can write about it in less than an hour too. (as long as you prepped all the pictures in advance!).

Have a great day!

To find out about my latest posts, please subscribe one of these ways:

By email: You can sign up by providing your email and you will be notified of new blog posts plus special offers. Make sure you confirm your subscription request by clicking the link in the email.

By liking my page on Facebook: Lisa Yang Jewelry on Facebook

By following me on Pinterest: Lisa Yang Jewelry on Pinterest

By subscribing on YouTube:  Lisa Yang Jewelry on YouTube

And Instagram: @lisayangjewelry

No comments:

Post a Comment