Making Holes in Coins for Jewelry (No Drill Needed)

Have you ever wanted to turn a coin or a metal object into a unique piece of jewelry—but weren’t sure how to make a clean hole without damaging it?

Coins and metal hoop findings with holes punched for jewelry making – no drill needed!

Why Punch Holes in Metal for Jewelry

Making holes in metal is incredibly useful for customizing jewelry findings or incorporating souvenirs and found objects like coins into your designs. With the right tools (spoiler: not a drill), it’s easy, quick, and gives you lots of creative freedom.

Let me show you how I’ve used simple metal punches to create some of my favorite earring and bracelet projects.

Tools for Punching Holes in Metal Jewelry

There are a few different tools that I use depending on the material and where I want the hole placed.

Screw-Style Metal Hole Punch

Adding a hole to earring finding with screw-type metal hole punch

My go-to tool for thicker items is a screw-style metal punch that creates two hole sizes (1.5mm & 2mm). It’s super easy to use:

• Slide your metal piece into the tool’s notch.
• Align the punch where you want the hole.
• Twist the handle until it presses the punch through the metal.

Tip: This tool is designed for holes close to the edge since it doesn't have a large area to insert the metal into. It's perfect for thicker jewelry findings or coins. It doesn’t scratch the metal and requires minimal force.

Pliers-Style Punch

Pliers-style hole punch provides precise placement and a choice of multiple hole sizes

When I need precise placement, I use a pliers-style hole punch—originally intended for leather, but it works great on thin metals too. This tool gives you more control and a range of hole sizes.

I use this punch when making projects like my wire bones ring because it lets me punch holes farther from the edge with better accuracy.

Project #1: Custom Hoop Earrings

Channel hoop findings in need of a hole to add beads

My first experiment with hole punching was these channel hoop findings from Nunn Design. I had a design in mind: turquoise heishi beads set down the middle of the channel. But I had no way to attach the wire cleanly.

Solution:

Channel hoop earring finding with holes made with screw-type hole punch

I added a hole near the bottom edge of the hoop to anchor the wire, then wrapped the other end near the post. Here's how they turned out:

Turquoise heishi beads wrapped neatly through a custom-punched hole.

I love how the beads curve around the hoop while sitting snug inside the channel—clean, modern, and super wearable.

Project #2: Lucky Penny Bracelet

Making a hole in a coin with a screw-type metal hole punch

One day, I found a penny on the street (lucky, right?) and decided to turn it into a charm for a bracelet. I was a little nervous about punching through a coin—but it was actually super easy. Like butter.

I strung the penny on elastic cord and surrounded it with turquoise beads. The placement of the hole off-center means the coin sits comfortably against your wrist, while the outside edge peeks out.

A little lucky, a lot of compliments.

Tool Comparison

Tool	Best For	Hole Size	Pros
Screw-Style Metal Punch	Coins, thick findings	2 fixed sizes	Easy, strong, no mess
Pliers-Style Punch	Thin metal, precise holes	Multiple	Accurate, portable
Electric Drill (optional)	Any thickness/placement	Any size	Versatile but requires setup

Note: I use affiliate links where possible to support my content. Thanks for your support!

Tips for Success

• Use a marker to mark your hole before punching.
• Add painter’s tape over polished areas to avoid scratches.
• For smooth edges, file or sand after punching.
• Always test your tool on scrap metal first.
• Label the screw punch to show which side makes the small and large holes for easier use.

Is It Legal to Punch Holes in Coins?

Yes—modifying coins for jewelry is perfectly legal as long as you're not intending to defraud or counterfeit. Creating jewelry from coins is considered artistic or personal use.

Want More Jewelry Making Tips?

If you enjoyed this article, follow me on Instagram @LisaYangJewelry or Facebook, or sign up for my newsletter to get updates on new jewelry projects and tips.

Article updated 6/9/2025